Ringlock System

Ringlock Horizontal, Tube size: OD48.3 x 3.2 mm, Steel Grade:S235 or S355. Surface treatment: Hot dip galvanized. Ledgers are also used as guard rail.

The Mid Transom is designed to create a transom at the plank level anywhere inside of a bay by straddling the outer Ledgers / Transoms of a bay. Tube size: OD48.3 x 3.2 mm, Steel Grade: S235 or S355, Surface treatment: Hot dip galvanized.

The Plank to Plank Transom is used where ladder access opening is required on one side of the access Platform, or infill a gap in the platform. Tube size: OD48.3 x 3.2 mm, Steel Grade: S235 or S355, Surface treatment: Hot dip galvanized.

Side / Hop-up Bracket O-Type The side/hop-up bracket is used to extend the working platform closer to the building structure. Steel Grade: S235 or S355. Surface treatment: Hot dip galvanized.

Lattice Girder, No Spigot 19.7" (0.5m) The Lattice Girder is a horizontal menber of Ringlock scaffolding that allows for bridging over large spans of 14'-28'. Steel Grade: S235 or S355. Surface treatment: Hot dip galvanized.

Spigot Adapter Clamp (I-Bolt) The spigot Adapter Clamp (I-Bolt) allows the connection of Ringlock Standards at intermediate locations along the length of O-Type Ledgers, Truss Ledgers and Girders.

Steel Plank O-Type 9.5" (240mm) Ringlock Steel Plank, Width:9.5" (240 mm), Height: 70 mm, Thickness:1.8 mm. S235 Steel sheet, Surface treatment: Hot dip galvanized or Pre-galvanized.

Guardrail Standard The guardrail Standard is designed to provide a vertical connection to secure Ledger. Surface treatment: Hot dip galvanized.

Ringlock adjustable base jack is used for leveling the scaffold-standards at the same height. OD: 38.1 x 4.5 mm. Base plate: 150 x 150 x 6 mm. Surface treatment: Hot dip galvanized or Electroplated